Table of Contents
Advertisement
• To wake the camera from sleep mode, select
Wake Camera.
Using the Stress Level Widget
The stress level widget displays your current stress level
and a graph of your stress level for the last several hours.
It can also guide you through a breathing activity to help
you relax.
1 While you are sitting or inactive, press UP or DOWN
from the watch face to view the stress level widget.
TIP: If you are too active for the watch to determine
your stress level, a message appears instead of a
stress level number. You can check your stress level
again after several minutes of inactivity.
2 Press
to view a graph of your stress level for the last
four hours.
Blue bars indicate periods of rest. Yellow bars indicate
periods of stress. Gray bars indicate times that you were
too active to determine your stress level.
3 To start a breathing activity, press DOWN >
enter a duration for the breathing activity in minutes.
Customizing the My Day Widget
You can customize the list of metrics displayed on the
My Day widget.
1 From the watch face, press UP or DOWN to view the
My Day widget.
2 Hold MENU.
3 Select Options.
4 Select the toggle switches to show or hide each
metric.
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut
menu options in the controls menu
Menu, page
1).
1 Hold MENU.
2 Select Controls.
3 Select a shortcut to customize.
4 Select an option:
• Select Reorder to change the location of the
shortcut in the controls menu.
• Select Remove to remove the shortcut from the
controls menu.
5 If necessary, select Add New to add an additional
shortcut to the controls menu.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data.
You can also download custom watch faces from the
Customizing Your Device
, and
(Viewing the Controls
Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must
install a watch face from the Connect IQ store
Features, page
14).
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch face.
1 From the watch face, hold MENU.
2 Select Watch Face.
3 Press UP or DOWN to preview the watch face
options.
4 Select Add New to scroll through additional pre-
loaded watch faces.
5 Select
> Apply to activate a pre-loaded watch face
or an installed Connect IQ watch face.
6 If using a pre-loaded watch face, select
Customize.
7 Select an option:
• To change the style of the numbers for the
analog watch face, select Dial.
• To change the sport for the gauges on the
performance watch face, select Select Sport.
• To change the style of the hands for the analog watch
face, select Hands.
• To change the style of the numbers for the
digital watch face, select Layout.
• To change the style of the seconds for the
digital watch face, select Seconds.
• To change the data that appears on the watch face,
select Data.
• To add or change an accent color for the watch face,
select Accent Color.
• To change the background color, select Bkgd�
Color.
• To save the changes, select Done.
Sensors Settings
Compass Settings
Hold MENU, and select Sensors & Accessories >
Compass.
Calibrate: Allows you to manually calibrate the compass
sensor
(Calibrating the Compass Manually, page
Display: Sets the directional heading on the compass
to letters, degrees, or milliradians.
North Ref�: Sets the north reference of the compass
(Setting the North Reference, page
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic- sensor data
when moving (Auto), or GPS data only (Off).
(Connect IQ
>
44).
44).
43
Advertisement
Table of Contents
