Enabling Auto Climb; 3D Speed And Distance; Turning On And Off The Lap Key; Using Auto Scroll - Garmin FENIX 6X Owner's Manual

automatically when you stop moving. This feature is
helpful if your activity includes stop lights or other places
where you must stop.
NOTE: History is not recorded while the timer is
stopped or paused.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Pause.
6 Select an option:
• To pause the timer automatically when you stop
moving, select When Stopped.
• To pause the timer automatically when your pace
or speed drops below a specified level, select
Custom.

Enabling Auto Climb

You can use the auto climb feature to detect elevation
changes automatically. You can use it during activities such
as climbing, hiking, running, or biking.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Climb > Status.
6 Select Always or When Not Navigating.
7 Select an option:
• Select Run Screen to identify which data screen
appears while running.
• Select Climb Screen to identify which data
screen appears while climbing.
• Select Invert Colors to reverse the display colors
when changing modes.
• Select Vertical Speed to set the rate of ascent over
time.
• Select Mode Switch to set how quickly the
device changes modes.
NOTE: The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.

3D Speed and Distance

You can set 3D speed and distance to calculate your speed
or distance using both your elevation change and your
horizontal movement over ground. You
can use it during activities such as skiing, climbing,
navigating, hiking, running, or biking.

Turning On and Off the Lap Key

You can turn on the Lap Key setting to record a lap or a
rest during an activity using LAP. You can turn off the
Lap Key setting to avoid recording laps due to accidental
key presses during an activity.
40
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select Lap Key.
The lap key status changes to On or Off based on
the current setting.

Using Auto Scroll

You can use the auto scroll feature to cycle through all of
the activity data screens automatically while the timer is
running.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Scroll.
6 Select a display speed.

Changing the GPS Setting

For more information about GPS, go to
about-gps.
1 Hold MENU.
2 Select Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select GPS.
6 Select an option:
• Select Off to disable GPS for the activity.
• Select GPS Only to enable the GPS satellite
system.
• Select GPS + GLONASS (Russian satellite system)
for more accurate position information in situations
with poor sky visibility.
• Select GPS + GALILEO (European Union satellite
system) for more accurate position information in
situations with poor sky visibility.
• Select UltraTrac to record track points and sensor
data less frequently (UltraTrac, page
NOTE: Using GPS and another satellite together can
reduce battery life more quickly than using GPS only
(GPS and Other Satellite Systems, page
GPS and Other Satellite Systems
The GPS + GLONASS or GPS + GALILEO options offer
increased performance in challenging environments and
faster position acquisition than using GPS only. However,
using GPS and another satellite system together can reduce
battery life more quickly than using GPS only.
UltraTrac
The UltraTrac feature is a GPS setting that records track
points and sensor data less frequently. Enabling
Garmin.com.sg/
40).
40).
Customizing Your Device