Download Print this page

Troubleshooting - Milwaukee M12 BHCS3L User Manual

Hide thumbs Also See for M12 BHCS3L:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
5
7
ATTACHING THE SHOULDER STRAP
To attach the shoulder strap, perform the following steps:
1. Remove the battery pack.
2. Remove the powered head from the tank.
3. Clip the shoulder strap to the D-ring on each anchor point of the
product using the carabiner.
Gate
D-ring
Carabiner
6
WEARING THE SHOULDER STRAP
To wear the strap, perform the following steps:
1. Put either right or left arm and head through the strap.
2. Adjust the strap to fi t comfortably.
3. Slide the shoulder pad to the appropriate position.
REMOVING THE SHOULDER STRAP
To unclip the strap, perform the following steps:
1. Hold the product by the handle.
2. Grip the carabiner, push the gate, and slide the carabiner off
the bevel.
BLOCKED NOZZLES
If the nozzles are blocked, turn off the sprayer immediately.
Ensure that the battery pack is removed.
Wear protective clothing, such as gloves and eye protection.
Disassemble the nozzles and clean with clear water. Replace
defective fi lters.

TROUBLESHOOTING

Problem
Low pressure
No pressure
Leaky
Motor is not running
No spray
SYMBOLS
Read the instructions carefully before starting the
product.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the product.
Always wear eye protection.
Wear a suitable dust protection mask.
Use protective clothing.
ENGLISH
Possible cause
Solution
Not enough battery
Recharge the
charge
battery pack.
Not enough battery
Recharge the
charge
battery pack.
Connections are not
Retighten
connected properly,
connecting elements
gaskets are porous
and replace sealing
elements.
Empty or defective
Recharge or replace
battery pack
the battery pack.
Spray nozzles are
Clean the nozzles
blocked
with compressed air
or a suitable solvent.
29

Advertisement

loading

This manual is also suitable for:

M12 bhcs7l