Page 1
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. / No de cat. 2820-20, 49-16-28PS, 49-16-28CS, 49-16-28WS M18™ SWITCH TANK™ POWERED BASE, SPRAYER TANK ASSEMBLY, CONCRETE SPRAYER TANK ASSEMBLY, WATER SUPPLY TANK ASSEMBLY BASE ÉLECTRIQUE SWITCH TANK™ M18™, ENSEMBLE RÉSERVOIR- PULVÉRISATEUR, ENSEMBLE RÉSERVOIR-PULVÉRISATEUR POUR BÉTONNAGE, ENSEMBLE RÉSERVOIR-PULVÉRISATEUR POUR VERSAGE D’EAU...
IMPORTANT POWER TOOL USE AND CARE • Do not force the power tool. Use the correct power SAFETY tool for your application. The correct power tool INSTRUCTIONS • Do not use the power tool if the switch does not Read all safety warnings, instruc- Any power tool that cannot be WARNING controlled with the switch is dangerous and must be...
Do not use this tool if you do not understand these parts. This will ensure that the safety of the power operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained Service of battery packs should only be performed by the •...
FUNCTIONAL DESCRIPTION ASSEMBLY Recharge only with the charger WARNING Removing/Inserting the Battery To remove the battery, push in the release buttons WARNING changing or removing accessories. To insert the battery, slide the pack into the body WARNING recommended for this tool. Others Connecting the Spray Wand to the Trigger Handle 49-16-28PS...
Filling the Tank OPERATION WARNING Adjusting the Flow Rate ever chemicals are present. Mix chemicals per manufacturer's instructions. Flow 2820-20PS 2820-20CS 2820-20WS Failure to follow instructions may cause harsh Rate (Open Flow) chemicals to injure user or damage tool. A removable strainer prevents debris that can clog To reduce the risk of injury, always set on a level surface away from the WARNING...
APPLICATIONS tool, battery pack and charger to a MILWAUKEE Before using any chemicals and/ WARNING If the tool does not start or operate at full power with or solutions, read and follow all a fully charged battery pack, clean the contacts on original manufacturer instructions.
Note: If cord set is damaged, it should be replaced by an Authorized Service USA & CANADA Every MILWAUKEE power tool* (see exceptions below) is warranted to the Call to 55 4160-3547 original purchaser only to be free from defects in material and workman- part on an electric power tool which, after examination, is determined by 11520 Colonia Ampliación Granada...