System Requirements; Batteries For Iq8Wireless Devices - Honeywell ESSER FACP Technical Information

Periphery components for ESSER FACP
8.2

System requirements

To use the IQ8Wireless components to the FACP the esserbus
Fig. 37: IQ8Wireless components on the loop
8.3

Batteries for IQ8Wireless devices

The IQ8Wireless devices must be powered only with the recommended and approved lithium batteries
(Part No. 805597).
The battery lifetime relates to the inserted fire alarm detector and the ambient temperature. In best case a
battery lifetime up to 3 years may be achieved.
The charging status of the battery will be temporarily and automatically proofed. If the battery charging voltage
drops under the required value an appropriate message is displayed at the Fire Alarm Control Panel. The
batteries must be replaced within 14 days.
Observe the information on use of batteries in the "IQ8Wireless transponder for wall mounting"
documentation (Part No. 798941.10).
56
IQ8Wireless transponder
esserbus / esserbus
®
IQ8Wireless gateway
® or powered loop function is needed.
IQ8Wireless detector base
PLus
®
IQ8Wireless Interface
TI 798960.GB0 / 04.20