Table of Contents
Advertisement
7.3
IQ8Wireless detector base
The mounting height of the IQ8Wireless base (Part No. 805593.10) must be coordinated with the type of fire
detector which is installed. Additionally, the mounting position of the IQ8Wireless base should be selected to
ensure a good radio connection (signal strength) between the IQ8transmitter/receiver unit and the associated
IQ8Wireless devices.
Standard detector base (Part No. 805590) supplied device
IQ8Wireless base with cover.
Suitable detectors
Fixed heat detector (Part No. 802171, 802177, 803171)
•
Rate-of-rise heat detector (Part No. 802271, 803271)
•
•
Optical smoke detector (Part No. 802371, 803371)
•
O²T multisensor fire detector (Part No. 802374, 803374)
•
OTG multisensor fire detector (Part No. 802473)
Fig. 36: IQ8Wireless detector base
TI 798960.GB0 / 04.20
Periphery components for ESSER FACP
Loop
53
Advertisement
Table of Contents
