Final Gear Oil - Yamaha VIKING Owner's Manual

5B410013

Final gear oil

Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
1. Final gear oil
3. Final gear oil filler bolt
1 2 3
4
2. Gasket
4. Correct oil level
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
NOTICE: Be sure no foreign material
enters the final gear case.
4. Check the gasket for damage, and re-
place it if necessary.
5. Install the oil filler bolt and its gasket,
and then tighten the bolt to the speci-
fied torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
8-15
1
2
3
4
5
6
7
8
9
10
11
12
13
14