Final Gear Oil - Yamaha YXZ10YEXR Owner's Manual

5. Apply a light coat of clean engine oil to
the O-ring of the new oil filter cartridge.
TIP
Make sure that the O-ring is properly seated.
1. O-ring
6. Install the new oil filter cartridge, and then
tighten to the specified torque.
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
1
1. Torque wrench
7. Follow steps 4–9 of the "To change the
8. Install the bottom panel.
EBU36055

Final gear oil

Check the oil level and change the final gear
oil at the intervals specified in the periodic
maintenance chart.
9-34
1 1
transmission oil" section for the oil filling
procedure.
9