V-Belt Case Drain Plug; Cleaning The Spark Arrester - Yamaha VIKING Owner's Manual

EVU00780

V-belt case drain plug

The V-belt case drain plug is located under
the cargo bed. (See page 4-26 for cargo bed
lifting and lowering procedures.)
After riding in water deep enough to allow wa-
ter to enter the V-belt case, remove the drain
plug to drain any water from the case.
If water drains from the V-belt case after re-
moving the drain plug, have a Yamaha dealer
inspect the vehicle, as the water may affect
other engine parts.
8
1. V-belt case drain plug
5B410018

Cleaning the spark arrester

WARNING
Hot exhaust system may cause burns. To
avoid burns or fires, make sure that the en-
gine is stopped and the exhaust system is
cool before cleaning the spark arrester. Do
not start the engine while cleaning the ex-
haust system.
1. Remove the tailpipe bolts.
1
1
1. Tailpipe bolt (× 4)
8-30
1