Yamaha VIKING Owner's Manual page 41

To set the clock
1. Set the display to the clock mode.
2. Push the "SELECT" button and "RESET"
button together for at least three sec-
onds.
3. When the hour digits start flashing, push
the "RESET" button to set the hours.
4. Push the "SELECT" button, and the
minute digits will start flashing.
5. Push the "RESET" button to set the min-
utes.
6. Push the "SELECT" button, and then re-
lease it to start the clock.
Voltage display mode
This display shows the battery voltage.
" " appears for 1 second when the volt-
age display mode is first selected, and then
" " appears and the battery voltage is dis-
played.
If the battery voltage is less than 10 volts, "LO"
is displayed, and if the voltage is above 16
volts, "HI" is displayed.
4-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14