Yamaha VIKING Owner's Manual page 123

1
1. Torque wrench
9. Install the engine oil drain bolt and its
new gasket, and then tighten the bolt to
the specified torque.
Tightening torque:
Engine oil drain bolt:
30 Nm (3.0 m·kgf, 22 ft·lbf)
10. Remove the right rear panel by removing
the quick fastener screws and bolts.
1
2
1. Right rear panel
3. Bolt (× 2)
11. Refill with the specified amount of recom-
mended engine oil, and then insert the
dipstick completely into the oil filler hole.
Recommended engine oil:
See page 10-1.
Oil quantity:
Without oil filter cartridge replacement:
2.20 L (2.33 US qt, 1.94 Imp.qt)
With oil filter cartridge replacement:
2.30 L (2.43 US qt, 2.02 Imp.qt)
8-13
3
2. Quick fastener screw (× 4)
1
2
3
4
5
6
7
8
9
10
11
12
13
14