Fujitsu ARXG45KMLA Service Manual page 143

¢ Function settings by using remote controller
Some function settings can be changed on the remote controller. After confirming the setting proce-
dure and the content of each function setting, select appropriate functions for your installation envi-
ronment.
 Setting procedure by using remote controller
Remote controller is not attached for this product. For details of the installing remote controller, refer
to following information.
• Overview information: Operating manual of the remote controller
• Setting procedure: Installation manual of the remote controller
 Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
18 Function setting list
2)
Function no.
1) 11
2) 21
3) 30/31
4) 35/36
5) 40
6) 42
7) 44
8) 46
9) 48
10) 49
11) 51
12) 60
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
2) Static pressure
Select the appropriate static pressure according to the installation conditions.
Function number
21
1-1. Function settings on indoor unit
Filter sign
Static pressure
Room temperature control for indoor unit sensor
Room temperature control for wired remote controller sensor
Auto restart
Room temperature sensor switching
Remote controller custom code
External input control
Room temperature sensor switching (Aux.)
Indoor unit fan control for energy saving for cooling
Primary and secondary settings
Switching functions for external output terminal
Setting value
00
01
02
03
Setting value
00
01
02
03
- (05-3) -
Functions
Setting description
Standard (2,500 hours)
Long interval (4,400 hours)
Short interval (1,250 hours)
No indication
Setting description
Normal
High static pressure 1
High static pressure 2
High static pressure 3
Factory setting
♦
Factory setting
♦
1. Function settings