Invacare POC1-100C-EU User Manual page 62

Table of Contents

Advertisement

Invacare® Platinum® Mobile
LCD DISPLAY TEXT:
NOTES:
The alarm will turn on when the oxygen purity has dropped below 85%.
The alarm will turn off when the oxygen output purity has increased above to 87%.
The alarm limits have a tolerance of +/- 2%.
Alarm signal generation may be delayed by up to 128 seconds due to the monitoring algorithm used to prevent nuisance alarms.
Call your provider and report the problem if the warning continues with next use.
LCD DISPLAY TEXT:
Cannot charge
Allow to cool
INDICATORS:
Single audible beep every 30 seconds
YELLOW alarm indicator illuminated
NOTES:
The alarm will turn off when the required battery temperature is reached, when the battery is removed, or when external
power is disconnected.
62
DESCRIPTION:
DESCRIPTION:
Battery is too hot to allow the battery
to charge.
This alarm only occurs when External
Power is connected.
SOLUTIONS:
SOLUTIONS:
1. Move concentrator to cooler
surroundings. Allow concentrator to
cool down to less than 104°F (40°C),
OR
2. Remove battery (with AC or DC
power connected) to allow battery
to cool.
1187374-F

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum mobilePoc1-100c-az

Table of Contents