Table of Contents
Advertisement
Invacare® Platinum® Mobile
1. With the concentrator running, press the flow selection
button B to increase the pulse flow setting by one
increment.
2. Press the flow selection button additional times, as
needed, until your prescribed flow setting (P1 to P5) is
shown on the display screen C.
The concentrator has five pulse flow settings. When
the maximum pulse flow setting P5 is reached, the
pulse flow setting returns to setting P1 with the next
button press.
Each time the flow setting is changed, an audible
beep will occur and the display screen backlight will
turn on for five seconds.
If a message other than the pulse flow setting is
shown on the display screen, the adjusted pulse flow
setting will temporarily be displayed for five seconds
after pressing the flow selection button.
44
The concentrator pulse flow setting at power-up will
be the same flow setting selected the last time the
unit was turned off.
4.10 Battery Life and Management
Time away from home is greatly extended by combining
the use of the AC power adapter, DC power cable and the
concentrator's batteries. To ensure the battery(s) maintain
their optimal charge level, utilize the AC power adapter
whenever you have access to electric power. Utilize the DC
power cable whenever you are in a vehicle.
CAUTION!
Risk of Minor Injury or Discomfort
Battery exhaustion will result in a loss of
supplemental oxygen. To ensure proper
supplemental oxygen delivery during a power
outage:
– Plug your portable concentrator into an
alternate power source.
– Have an alternate source of oxygen available
that does not require a power source.
What to Do
•
When you first receive your concentrator, fully charge
the battery(s) overnight.
•
Keep your battery(s) fully charged when using the
concentrator on a daily basis.
•
Your concentrator battery(s) can be recharged at any
time.
1187374-F
Advertisement
Table of Contents
