Siemens SIMATIC NET SCALANCE XF-200G Operating Instructions Manual page 6

Industrial ethernet switches
Table of Contents

Advertisement

Introduction
Catalogs
You will find the article numbers for the Siemens products of relevance here in the following
catalogs:
• SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
• SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70
• Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog
de&language=en)
You can request the catalogs and additional information from your Siemens representative.
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are
not possible.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing confidential
data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SCALANCE, C-PLUG, OLM
6
(https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/
Operating Instructions, 02/2023, C79000-G8976-C676-01
(https://
are
®
SCALANCE XF-200G

Advertisement

Table of Contents
loading

Table of Contents