Siemens SIMATIC NET SCALANCE XF-200G Operating Instructions Manual page 15

• Configurable port
– ✓
– --
• Authentication
Specifies whether the communication partner is authenticated.
• Encryption
Specifies whether or not the transfer is encrypted.
List of available services
The following is a list of all available services and their ports through which the device can be
accessed.
The table includes the following columns:
• Service
The services that the device supports
• Default port status
This is the status of the port in the delivery state (factory setting).
• Configurable port/service
Indicates whether the port number or the service can be configured via WBM / CLI.
• Authentication
Specifies whether the communication partner is authenticated.
If optional, the authentication can be configured as required.
• Encryption
Specifies whether the transfer is encrypted.
If optional, the encryption can be configured as required.
The following is a list of all available protocols and services as well as their ports through
which the device can be accessed.
Service
DHCPv4 Server
DHCPv4 Client
EtherNet/IP
HTTP Server/Client
3)
HTTPS WBM Server/
Client
NTP Client
NTP (secure)
SCALANCE XF-200G
Operating Instructions, 02/2023, C79000-G8976-C676-01
The port status can be changed.
The port status cannot be changed.
Protocol / Port Default port
number status
UDP/67 Closed
UDP/68 Open
TCP/44818 Closed
UDP/2222 (Open with
UDP/44818 EtherNetIP var‐
iants)
TCP/80 Closed
TCP/443 Open
UDP/123 Closed
UDP/123 Closed
Configurable Authentication
Port Service
- ✓
- ✓
- ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Security recommendations
Encryption
5)
- -
- -
- -
✓ -
✓ ✓
- -
✓ -
15