Registration In I/O Map; Settings Using Fpwin Gr7 (For Cpu With Built-In Scu); Settings Using Fpwin Gr7 (For Serial Communication Unit) - Panasonic AFP7CPS4E User Manual

I/O Allocation

4.2 Registration in I/O Map

4.2.1 Settings Using FPWIN GR7 (For CPU with built-in SCU)

 For the CPU with built-in SCU, there is no need to set with FPWIN GR7 because the
following fixed areas are allocated.
Unit type
CPU Unit CPU with built-in SCU

4.2.2 Settings Using FPWIN GR7 (For Serial Communication Unit)

The explanation below shows the case that the serial communication unit is registered in the
slot number 1.
PROCEDURE
1. Select "Options" > "FP7 Configuration" in the menu bar.
The "FP7 Configuration" dialog box appears.
2. Select "I/O map" in the left pane.
The "I/O map" dialog box is displayed.
3. Double-click Slot No. 0.
The "Unit selection [Slot No. 0]" dialog box is displayed.
4. Select "CPU unit" for Unit type, and select a CPU unit used for Unit name,
and press [OK] button.
The CPU unit is registered. Only CPU unit can be registered in Slot No. 0. Slot
No.1 and subsequent numbers cannot be set unless Slot No. 0 is set.
4-6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Model number
2 words (32 points)
Common
WX0 - WX1 Fixed
No. of occupied words
(No. of occupied points)
Input Output
2 words (32 points)
WY0 - WY1 Fixed