Recommended Maintenance Schedule(S) - Exmark Lazer LZE Operator's Manual

Maintenance
WARNING
Fuel system components are under high
pressure. The use of improper components
can result in system failure, gasoline leakage
and possible explosion.
Use only approved fuel lines and fuel filters
for high pressure systems.
• Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace damaged blades. Never
straighten or weld them.
• Use jack stands to support the machine and/or
components when required.
CAUTION
Raising the machine for service or
maintenance relying solely on mechanical
or hydraulic jacks could be dangerous. The
mechanical or hydraulic jacks may not be
enough support or may malfunction allowing
the machine to fall, which could cause injury.
Do not rely solely on mechanical or hydraulic
jacks for support. Use adequate jack stands
or equivalent support.
• Carefully release pressure from components with
stored energy.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 100 hours
After the first 250 hours
Before each use or daily
Maintenance Procedure
• Change the engine oil.
• Check the wheel hub slotted nut torque specifications.
• Check the wheel lug nuts.
• Check the park brake adjustment.
• Change the hydraulic filter and fluid.
• Check the engine oil level.
• Check the mower blades.
• Check the safety interlock system.
• Check the rollover protections systems (roll bar) knobs.
• Check the seat belt.
• Check for loose hardware.
• Clean the grass and debris build-up from the machine and cutting deck.
• Clean the engine and exhaust system area.
• Clean the hydro fan cooling guards, hydro cooling fins, and fan.
• Clean the grass build-up from under the cutting deck.
• Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running. If the maintenance or adjustment
procedure require the engine to be running and
components moving, use extreme caution.
WARNING
Contact with moving parts or hot surfaces
may cause personal injury.
Keep your fingers, hands, and clothing clear
of rotating components and hot surfaces.
• Check all bolts frequently to maintain proper
tightness.
52