Exmark Lazer LZE Operator's Manual page 46

Operation
Figure 31
• Adjusting the Rear, Shock Assemblies
The slots for the rear, shock assemblies have
detent positions for reference. The rear, shock
assemblies can be positioned anywhere in the slot,
not just the detent positions.
The following graphic shows the position for a
soft or firm ride and the different detent positions
(Figure 32).
Figure 32
1. Firmest position
2. Softest position
g030021
g030095
3. Detents in the slots
Note: Ensure the left and right rear, shock
assemblies are always adjusted to the same
positions.
Adjust the rear, shock assemblies (Figure 33).
46