ADTRAN Total Access 3000 System Manual page 4

Revision History
This is the fifth issue of this manual. Changes are as follows:
Section 1.0 – Removed information regarding the DSLAM Cell
Section 2.0 – Removed physical dimensions and power and heat
Section 3.0 – Removed DSLAM System Applications.
Section 5.0 – Removed DSLAM Installation and Turnup Procedures.
Section 7.0 – Removed DSLAM Detail Level Procedures.
Certification
Total Access
requirements and is listed to UL 60950.
Federal Communications Commission Statement
This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instruction
manual, this equipment may cause interference to radio
communications. Total Access 3000/3010 has been tested and found
to comply with limits for a Class A digital device pursuant to Subpart
B of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.
This equipment does not exceed Class A limits for radio emission for
digital apparatus, set out in the Radio Interference Regulation of the
Canadian Department of Communications.
Total Access ® 3000/3010 System Manual
Switch Modules and DSLAM Access Modules.
dissipation data for the DSLAM Cell Switch Modules
and DSLAM Access Modules.
® 3000/3010 is compliant with all NEBS Level 3
6TAINT001-1E