ADTRAN Total Access 3000 System Manual page 208

6TANTP504-1E
TOTAL ACCESS 3000/3010
NTP-504
Page 2 of 4
The SCU is capable of storing provisioning settings for both MUX and Access
modules. Auto Provisioning transfers provisioning data, including Service State,
stored in the SCU to the respective slot upon the installation of a replacement
module of the same kind. Replacement modules of a different kind would have to
be manually provisioned, after which the provisioning settings would then be
stored in the SCU. For example, the provisioning settings of a STS-1 MUX would
be downloaded to a replacement STS-1 MUX, but not to a DS3 MUX module.
If MUX Auto Provisioning is enabled in the SCU and a DS3 MUX unit is
subsequently removed and replaced with another DS3 MUX unit, the SCU will
automatically download the provisioning settings, including Service State, to the
replacement DS3 MUX.
When both Auto and Linked Provisioning are enabled, the unit will get its
provisioning settings through Linked-Provisioning. Hence, the replacement
unit will not receive Service State information and will have to be manually
placed in the appropriate Service State.
1. Logon to the system, if necessary
2. From the Total Access Main menu, select option 1, System Controller, and press
<Enter>.
3. From the System Controller Menu, select option 2, Provisioning, and press
<Enter>.
4. From the Provisioning Menu, select option 13, Auto-Provisioning, and press
<Enter>. Check the setting for MUX Auto-Provisioning. To enable, continue
with the next step.
5. From the Auto-Provisioning menu, select option 2, MUX Auto-Provisioning, and
press <Enter>.
6. From the MUX Auto-Provisioning menu, select option 2, Enable, and
press <Enter>.
7. Return to the Total Access Main Menu by pressing <Esc>.
1.3 Primary MUX (slot A) Installation Procedure
1.3.1 Unpack and Inspect the Working DS3 MUX Module
Each DS3 MUX Module is shipped in its own cardboard shipping carton. Open the
carton carefully and avoid deep penetration into the carton with sharp objects. After
removing the unit from the carton, unwrap the bubble-wrap and pull the unit from the
anti-static plastic bag.
© 2003, ADTRAN, Inc.
NOTE
For details, go to: DLP-716.
Total Access ® 3000/3010 System Manual