ADTRAN Total Access 3000 System Manual page 369

Perform Steps Below in the Order Listed
3. From the Total Access Main menu, select System Controller Unit, and press
<Enter>.
4. From the System Controller Unit menu, select Provisioning, and press
<Enter>.
5. From the Provisioning menu, select SCU/System Administration, and press
<Enter>.
6. From the System Administration menu, select Software Update, and press
<Enter>.
7. From the Software Update menu, select TFTP Update, and press
<Enter>.
8. From the TFTP Update menu, select Firmware TFTP Server, and press
<Enter>.
9 Enter and/or verify the IP Address of the TFTP Server containing the
software file.
10. From the TFTP Update menu, select Remote Filename, and press
<Enter>.
11. Enter the name of the file that was saved to the TFTP Server in step 1.
Be sure to include all punctuation and file extensions that are associate with the
file.
12. From the TFTP Update menu, select Initiate Transfer, and press
<Enter>.
13. The TFTP Status will state Transfer in Progress while transferring, and
Transfer Complete when finished
14. The Flash Status will state Flash Write Completed when finished.
Once the Flash Status flashes Flash Write Completed, press <Esc> twice to return
tothe Software Update menu
15. Select Reboot SCU, and press <Enter>.
Total Access 3000/3010 System Manual
6TADLP728-1E
TOTAL ACCESS 3000/3010
© 2003, ADTRAN, Inc.
DLP-728
Page 3 of 4