Lexus LS 600h L 2012 Owner's Manual page 226

Switching to high beam
The Automatic High Beam can be operated when
■
The "POWER" switch is in ON mode.
Camera sensor detection information
■
High beam may not be automatically turned off in the following situations:
●
• When oncoming vehicles suddenly appear from a curve.
• When the vehicle is cut in front of by another.
High beam may be turned off if an oncoming vehicle that is using fog lights with-
●
out using the headlights is detected.
House lights, street lights, red traffic signals, and illuminated billboards or signs
●
may cause the high beam to turn off.
The following factors may affect the amount of time taken to turn high beam on
●
or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and pre-
ceding vehicles
• Road conditions (wetness, ice, snow etc.)
• The number of passengers and amount of baggage
High beam may be turned on or off when unexpected by the driver.
●
2-3. Operating the lights and windshield wipers
Turn the light switch to
position.
2
223