Canon PIXMA mini260 Service Manual page 5

Part 1: MAINTENANCE
1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by
Service Engineer
(1) Adjustment
Adjustment
Destination settings
(EEPROM settings)
Ink absorber counter
resetting
(EEPROM settings)
Paper feed motor
position adjustment
LF / Eject correction
Grease application
Ink system function
check
Caution: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are not
re-adjustable.
The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
Timing
- At logic board replacement
- At logic board replacement
- At ink absorber replacement
- At paper feed motor
replacement
- At logic board replacement
- At LF roller replacement
- At eject roller replacement
- At guide rail replacement
- At spur base replacement
- At platen unit replacement
- At pressure roller replacement
- At carriage unit replacement
- At LF roller replacement
- At AP motor replacement
- At paper thickness lever
replacement
- At idle gear replacement
- At guide rail replacement
- At logic board replacement
- At carriage unit replacement
Purpose
To set destination.
To reset the ink absorber counter.
To adjust the belt tension.
(Position the paper feed motor so that the
belt is stretched tight.)
To correct line feeding and paper ejection
accuracy.
- To the carriage shaft sliding portion
- To the carriage oil pad
- To the LF roller groove
- To the reduction gear
- To the paper thickness lever sliding
portion
- To the idle gear contact
- To the carriage slider
To maintain detection functionality for
presence and position of the ink tank.
1-1
TABLE OF CONTENTS
Tool
None.
Perform in the
service mode.
None.
Perform in the
service mode.
None.
None.
Perform in the
service mode.
EU-1
IF-20
MOLYKOTE
PG641
FLOIL KG-107
None.
Perform in the
service mode.
Approx.
time
1 min.
1 min.
2 min.
3 min.
1 min.
1 min.