Canon PIXMA mini260 Service Manual page 29

Part 1: MAINTENANCE
3-4. Verification Items
(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The information is printed in the top area of the
printout.)
mini260: Model name
Vx.xx: ROM version
TIC = xxxxxxxx: Timer IC data
D = xxx.x: Ink absorber counter value (%)
USB (xxxxxx): USB serial number
Note: For the ink amount in the ink absorber, confirm it in the EEPROM information print.
<Print check items>
On the service test print (sample below), confirm the following items:
- Check 1, top of form accuracy: The lines shall not extend off the paper.
- Check 2, EEPROM information
- Check 3, nozzle check pattern: Ink shall be ejected from all nozzles.
- Check 4, destination
- Check 5, check pattern for uneven printing due to line feeding or carriage movement: There shall be no remarkable unevenness.
- Check 6, straight line and carriage movement accuracy: There shall be no remarkable dot mis-alignment on a line.
- Check 7, LF / Eject correction values
<Service test sample>
1-25
TABLE OF CONTENTS