Operation Panel - Canon imageFORMULA DR-G2140 Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
3) Since there are bottom and front fitting
parts, remove the rear fitting part, slide

the right cover 1
and remove it from the main body.
Note: Do not pull it excessively because a ca-
ble is connected to the back side.
Figure 3-204
4) Remove the cable band with lock
connector with lock
right cover assembly
Figure 3-205
Note: The right cover assembly is composed
of the right cover, right upper cover and
operation panel. Remove them if nec-
essary.
3-4
to the bottom and front

and
1

2 and remove the

3 .
COPYRIGHT © CANON ELECTRONICS INC. 2018

3. Operation Panel

1) Remove the right cover assembly.
(Page 3-3)
2) Remove 2 screws
black) and remove the operation panel
and then the cable
Figure 3-206
Note: Since the operation panel assembly is
set as a single part, do not disassem-
ble it.
CANON DR-G2140/G2110/G2090 FIRST EDITION

1 (M3x8, self-tapping,

3 .

2