RECORDING
The PC master station can record images and/or sounds from other stations automatically or manually.
The recording operation differs from the settings in the Setting window as listed below. Refer to the SETTING MANUAL for the
*
recording settings, and change the settings as needed.
Picture Recording Mode
Snapshot
Video
NOTES:
•
When "Video" is selected at [Picture Recording Mode] and [Audio Recording] is set ON in the Setting window (
sounds from a sub station (door station or room sub station) or master station can also be recorded during the auto or manual recording.
•
Recording can no longer be made if the total amount of recorded fi les exceeds the "Max. Recording Space" set in the Setting window. A balloon
appears to show that "Max. Recording Space" is exceeded.
28
Setting
Auto Recording
Audio Recording
ON
(Not available)
(Auto Recording)
OFF
(Not available)
(Manual Recording)
ON
ON/OFF
(Auto Recording)
OFF
ON/OFF
(Manual Recording)
Description
When there is a call from a video door station, only one
snapshot of the fi rst displayed image at the door is recorded
automatically.
When monitoring or talking with a video station during a call,
you can manually record only one snapshot of the image at
the door.
When there is a call from a video door station, video recording
at the door starts automatically. When [Audio Recording] is
set to ON, the sound at the door is also recorded.
* Audio recording begins after a talking begins. The call tone
is not recorded.
* Video recording stops when the call from or communication
with the door station ends, and the PC master station
returns to the standby mode.
When monitoring or talking with a video station during a call,
you can make a video recording at the door manually.
* You can continue recording even if you begin
communicating while the recording of the monitoring image
is in progress.
* When the communication or the monitoring ends, video
recording stops.
→"SETTING MANUAL"), the