Door Release; Using The Privacy Function; While Receiving A Call; To Communicate With The Caller - Aiphone IS-SOFT Operation Manual

Door release

You can release the door while being called from,
communicating with, or monitoring a sub station if a door
release device is connected to the station.
Click while being called from, communicating with, or
monitoring the sub station.
The door is released for the time set in the System setting on a
PC.
* is lit while the door is released.
* If the set release time is "0", it can be released while the
button is clicked and held.
CAUTION:
Be sure to confi rm the visitor securely before releasing the door if the
sub station has no camera.
NOTE:
This function is disabled during scan-monitoring. ( → P. 26)
18

Using the PRIVACY function

The PRIVACY function of a PC master station prevents you from
being heard by other (PC) master stations in your site or remote
sites that call you.
To activate the PRIVACY function
Set "Privacy" to "Privacy 1" or "Privacy 2" in the Setting window.
If you will not use the PRIVACY function, set it to "OFF".
(→"SETTING MANUAL")
When set to "Privacy 1" or "Privacy 2", the PRIVACY
*
button lights up.

■ While receiving a call

• When the PRIVACY function is activated
The microphone of your PC master station is muted, so the
sounds at your side are not heard by the caller.
• When the PRIVACY function is off
The microphone of your PC master station is enabled, so the
sounds at your side are heard by the caller.

■ To communicate with the caller

• When th e PRIVACY function is activated
Click , and the microphone is enabled. Then you can
communicate with the caller.
• When the PRIVACY function is off
You can communicate with the caller without clicking
To mute the microp hone temporarily:
*
Click and hold , and the microphone is muted. Release
to enable the microphone.
The status of PC master station depending on the
PRIVACY mode
PRIVACY PRIVACY When receiving a call from
mode LED another (PC) master station
in your site or remote site
• The microphone is muted.
•
When you click
1 Lit
to answer the call, the
microphone is enabled.
• The microphone is muted.
•
When you receive a call from a
(PC) master station or remote
site, the caller and you are
2 Lit
notifi ed by a tone that you are
in the PRIVACY mode. When
you click
call, the microphone is enabled.
• The microphone is enabled.
Communication starts when a
direct voice call arrives from a (PC)
OFF Off master station or remote site.
• The micr ophone is muted
while clicking
NOTE:
When "Communication method" is set to "Press to talk" in the Setting
window, you do not have to activate the PRIVACY function.
When communicating
with a sub station
• Microphone is enabled.
•
The microphone is
muted while clicking
.
to answer the
.
.