Answering A Call; Communication In The Hands-Free Mode; Communication In The Press-To-Talk Mode - Aiphone IS-SOFT Operation Manual

Answering a call

The maximum duration of communication is preset in the
System setting. (It can be set to a maximum of 10 minutes.)
1
Answer the call in one of the following ways.

■ Communication in the hands-free mode

(Available when "Communication method" is set to
"Hands-free" in the Setting window.)
<When called in from a sub station>
1)
Click .
After a beep, you can communicate in the hands-
free mode.
1
* : When talking: Lit
When listening to the caller: Off
2) When you have fi nished the communication,
click .
Communication will end.
You can communicate in the press-to-talk mode by the
*
following operation even when "Hands-free" is set (e.g.,
when it is noisy around you).
•
Click and hold
communicating. (Beeps once.)
<When you received a direct voice call from
another (PC) master station>
You can talk back to it. If you click and hold
more than one second, it changes to the press-to-talk
mode. (Beeps once.)
1
[TALK]*
[OFF]
for more than one second while
for

■ Communication in the press-to-talk mode

(Available when "Communication method" is set to
"Press to talk" in the Setting window.)
<When called in from a sub station>
1)
Click momentarily.
[TALK]
After a beep, you can communicate in the press-to-
talk mode.
2)
Click and hold to talk and release to listen to
the caller.
(When talking)
Click and hold.
3) When you have fi nished the communication,
click .
<When you received a direct voice call from
another (PC) master station>
Click and hold to talk with and release to listen to
the caller.
[OFF]
(When listening to the
caller)
Release.
13