Using The Machine Setting Mode Key; Embroidery Settings - Baby Lock Solaris 2 Instruction And Reference Manual

Using the Machine Setting Mode Key

Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens, press
settings", for "Embroidery settings" or
sewing utility stitches, on common settings and on wireless settings, refer to the Instruction and Reference
Guide (Sewing).
Memo
• Press or

Embroidery Settings

■ Page 8
a Select the embroidery frame to be used
(page 103).
b Change the center point marker or grid lines
(page 103).
c Adjust the maximum embroidery speed setting
(page 103).
d Adjust the upper thread tension for embroidering
(page 99).
e Select the height of the embroidery foot during
embroidering.
f Adjust the needle position for embroidering.
g When set to "ON", pressing the "Start/Stop"
button when the presser foot is raised
automatically lowers the presser foot before
starting embroidering.
to display a different settings screen.
a
b
c
d
e
f
g
for "Sewing settings",
for "Wireless LAN settings". For details on settings for
■ Page 9
h Change the display units (mm/inch).
i Change the thread color display on the
"Embroidery" screen: thread number or color
name (page 103).
j Select the thread brand of the thread color display
(page 103). The thread brand setting is reflected
the next time a pattern is imported.
k Change the color of the background for the
embroidery display area.
l Change the color of the background for the
thumbnail area.
m Press to specify the size of pattern thumbnails.
n Adjust the distance between the pattern and the
basting stitching (page 96).
BEFORE EMBROIDERING
for "General
h
i
j
k
l
m
n
1
7