Changing The Position Of A Sticker - Baby Lock Solaris 2 Instruction And Reference Manual

USING THE CAMERA TO CONNECT PATTERNS
 Message appears on screen and carriage will move
after pressing
n
Follow steps
next pattern.
w
Lower the embroidery foot, and then
embroider the third pattern.
 When embroidering is finished, the following
message appears. When finished connecting
patterns, press
 After embroidering is finished,
located at the top left of LCD screen.
The three patterns have been connected.

Changing the Position of a Sticker

If the selected pattern or embroidery positioning
stickers for connecting the next pattern do not easily fit
in the embroidering area, follow the on-screen
instructions that appear after step
order to move the embroidery positioning stickers.
For an example, the on-screen instruction appears
when you use the embroidery frame with a size of 10
cm × 10 cm (4 inches × 4 inches) to connect patterns as
shown below.
a Pattern A
b Pattern B
150
.
q
- on pages 146-149 to position the
.
is no longer
o
on page 147 in
a
a
Refer to steps through
Three Patterns" using the embroidery frame
with a size of 10 cm × 10 cm (4 inches × 4
inches) to embroider the first pattern and to
connect the second pattern.
b
Following message appears in step
next pattern or affixed embroidery
positioning stickers are close to being out of
the embroidering area. Follow the
instructions and then press
a Embroidering area
a Pattern to be embroidered next
o
of "Connecting
p
if the
.
a
a