Embroidering Patterns - Baby Lock Solaris 2 Instruction And Reference Manual

EMBROIDERING A PATTERN

Embroidering Patterns

Example:
b
a Embroidery color order
b Cursor
Memo
• The [+] cursor moves over the pattern,
showing which part of the pattern is being
embroidered.
a
Using the automatic needle threader,
thread the machine for the first color.
54
b
Lower the embroidery foot, then press the
"Start/Stop" button to start embroidering.
 When the first color is completely embroidered, the
machine will automatically trim the threads and
stop. The embroidery foot will then automatically be
raised.
On the embroidery color order display, the next
color will move to the top.
Memo
• A setting in the settings screen can be
specified so that pressing the "Start/Stop"
button before starting embroidering
automatically lowers the embroidery foot
(page 7).
• If you want to get more attractive finishes,
try the procedures below;
a
- After 5-6 stitches, press the "Start/Stop"
button again to stop the machine.
- Trim the excess thread at the beginning of
embroidering. If the thread at the
beginning of embroidering is under the
embroidery foot, raise the embroidery
foot, then trim the excess thread.
• If there is thread left over from the beginning
of embroidering, it may be embroidered
over as you continue embroidering the
pattern, making it very difficult to deal with
the thread after the pattern is finished. Trim
the threads at the beginning of each thread
change.
c
Remove the thread for the first color from
the machine. Thread the machine with the
next color.