Attaching The Embroidery Frame - Baby Lock Solaris 2 Instruction And Reference Manual

ATTACHING THE EMBROIDERY FRAME

ATTACHING THE EMBROIDERY FRAME
Note
• Wind and insert the bobbin before attaching the embroidery frame.
a
Press the "Presser Foot Lifter" button to
raise the embroidery foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame's
with the holder's
a Arrow mark
34
.
d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
CAUTION
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
embroidering until you lower the frame-
securing lever.
■ Removing the Embroidery Frame
a
Raise the frame-securing lever.