Kenwood ProTalk TK-3710 User Manual page 37

Priority-channel Select
A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to
the Priority channel when a call is received on it, even if a call is being received on
a normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over
Priority channel 2. So, if a call is received on Priority channel 1 while a call is
already on Priority channel 2, the transceiver will automatically change to Priority
channel 1.
1 Select the channel to be set as Priority channel.
2 PF Button:
Press the programmed button to set the current channel as the
Priority Zone-Channel.
Menu Mode:
channel Select Mode.
3 Press the [ <B ] and [ C> ] buttons to select "NORMAL" (scan off), "PRI 1"
(priority 1), "PRI 2" (priority 2), or "PRI 1 2" (priority 1/2).
4 Press the [ S ] button to confirm and exit mode.
• The " " indicator appears on the display when the channel is Priority
channel.
Select "PRIORITY" and press the [ S ] button to enter Priority-
37