Button Lock
Locking the transceiver button operation. This function prevents the incorrect
operation of the transceiver by physical contact while carrying the transceiver,
such as around the waist.
PF Button:
Press the programmed button to lock the transceiver buttons.
•
Beep A (1 beep) sounds.
Press the button again to unlock.
•
Beep B (2 beeps) sounds.
•
While Button Lock is on, operate a button that has been locked. "LOCKED" is
displayed for 1 second.
•
Even if a button on the transceiver is pressed while the Button Lock is
enabled, a Button-entry Error Tone (1 beep) sounds.
•
Whether each button operation is targeted for the Button Lock can be
configured by your dealer. The following buttons are targeted for the Button
Lock when each configuration is enabled:
- Selector, Front Buttons, Side Buttons, Volume Control, and PTT Switch.
•
The following will still function and can be operated as per normal.
- Backlight, Battery Status, Button Lock, Function, Monitor, Monitor
Momentary, Squelch Off, and Squelch Off Momentary.
23