Step 2: Connect The Battery; Step 3: Trim The Transmitter - Emerson Rosemount 3051S Series Quick Installation Manual

Quick Installation Guide
00825-0100-4802, Rev BA
June 2007
S 2: C
TEP ONNECT THE
Connect the battery pack.
Product Discontinued. Click here for the new WirelessHART document.
NOTE:
Wireless devices should be powered up in order of proximity from the 1420 Wireless
Gateway, beginning with the closest device to the 1420. This will result in a simpler
and faster network installation.
S 3: T
TEP RIM THE
For the Wireless enabled HART transmitter (option code X), use the "3051S WPT" DD.
NOTE:
This can also be completed using AMS
device has joined the network.
NOTE:
In order for the 375 Field Communicator to interface with the 3051S, the battery must
be connected.
NOTE:
Transmitters are shipped fully calibrated per request or by the factory default of full
scale (span = upper range limit).
B
ATTERY
T
RANSMITTER
™
Suite: Intelligent Device Manager once the
P/N 00753-9200-0010 P/N 00753-9200-0010
COMM COMM
Rosemount 3051S Wireless
P/N 00753-9200-0010
COMM
5