Programming (Gh-Ns) - Aiphone GH SERIES 0207 AIC Installation And Operation Manual

8-5
a
GH-NS
b
Enter Program Mode
DISPLAY
WELCOME
RE-ENTER ID CODE
ID CODE =
Select Menu & Quit
DISPLAY
SELECT LANGUAGE
MENU
1
SELECT LANGUAGE
2
CHANGE ID CODE
3
ACCESS CODE
4
RESIDENT INFO
5
SET TIMER
6
CHANGE GREETING
7 TRANSFER DATA
8
SCROLL SPEED
9
QUIT
ON
1 2 3 4
YOUR OPERATION
1 1 1
INITIAL ID CODE
1 1 1 1
INITIAL ID CODE
+ 4 digit
YOUR OPERATION
BACKWARD FORWARD
Scroll
Go to Menu 1-8
DECIDE & NEXT
Standby
DECIDE & BACK
ON
1
ON
2

Programming (GH-NS)

a. Programming with a PC
• You can use a PC to enter data and write in or change resident
names.
• Use the connection cable that comes with GH-NS to connect
your PC to GH-NS.
• In your PC, install the setup tool program from the CD that
PC
comes with the GH-BC.
∗ For information on how to use the setup tool, see the text (.txt)
file that is installed in the same folder as the setup tool (.exe).
Save programmed data and resident information data to your
PC is recommended.
b. Programming with GH-NS and GH-10K
• Confirm that "Welcome" is shown on the Display, indicating
1
that the system is in standby mode.
∗ You can change the "Welcome" text.
• First, set the system to program mode. (For details, see above.)
∗ Before you begin programming, we recommend that you
register a new exclusive ID code for yourself so that the
system is not accessed by others. (For details, see 8-6.)
If you have forgotten your ID code, set the switch (#1) to ON
for approximately 2 seconds. The ID code will be reset to the
default setting of "∗1111".
NOTE: To display only resident name without room number; Set
the switch (#2) to ON.
- 31 -