Cpu; Installing The Cpu - DFI-ITOX EL332-IP User Manual

2
Hardware Installation

CPU

The system board is equipped with a surface mount LGA 775 socket. This socket
is exclusively designed for installing a LGA 775 packaged Intel CPU.
Important:
1. Before you proceed, make sure (1) the LGA775 socket comes with a
2. Make sure to keep the protective cap. RMA requests will be accepted

Installing the CPU

1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
3. Locate the LGA 775 CPU
s o c k e t o n t h e s y s t e m
board.
Important:
The CPU socket must not
come in contact with any-
thing other than the CPU.
Avoid unnecessary expo-
sure. Remove the protec-
tive cap only when you are
about to install the CPU.
18
protective cap, (2) the cap is not damaged and (3) the socket's con-
tact pins are not bent. If the cap is missing or the cap and/or contact
pins are damaged, contact your dealer immediately.
and processed only if the LGA775 socket comes with the protective
cap.