Table of Contents
Advertisement
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press <Enter>.
The Password Uninstalled dialog box will appear.
If you forgot the password, you can clear the password by erasing the CMOS RTC
(Real Time Clock) RAM using the Clear CMOS jumper. Refer to the Jumper Set-
tings section in chapter 2 for more information.
After you have set the supervisor password, the User Access Level field will ap-
pear.
Main
Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level
Change User Password
Password Check
Boot Sector Virus Protection
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
User Access Level
Selects the access level to the fields in the Setup utility.
Limited
Allows you to change settings to some fields such as Date and Time.
No Access
Prevents access to the Setup utility.
View Only
Allows you to view the settings but does not allow you to change the set-
tings.
Full Access
Allows you to change settings to all the fields in the utility.
BIOS SETUP UTILITY
PCIPnP
Boot
: Installed
: Not Installed
[Full Access]
[Setup]
[Disabled]
BIOS Setup
Security
Chipset
Limited: only limited
fields to be changed.
No Access: prevent user
access Setup Utility.
View Only: allow ac-
cess but the fields can
not be changed.
Full: allow change
except Supervisor
password.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
3
Exit
85
Advertisement
Table of Contents
