Table of Contents
Advertisement
Hardware Health Configuration
This section is used to configure the hardware monitor function.
Advanced
Hardware Health Configuration
Case Open Detection
System Temperature
CPU Temperature
SYSFAN Speed
Current CPU FAN
2nd FAN Speed
Vcore
+3.3 (V)
+5 (V)
+1.1 (V)
+1.5 (V)
+12 (V)
VBAT (V)
Smart Fan
CPUFAN TargetTemp Value
CPUFAN Tolerance Value
CPUFAN Stop Value
CPUFAN StopTime Value
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Smart Fan
The CPU speed will rotate according to the CPU's temperature. The higher the
temperature, the faster the speed of rotation. The options are enabled and
disabled.
CPUFAN TargetTemp Value
By default, the CPU fan is set to run at full speed. If you want to reduce the
fan's noise, you can slow down the fan's speed by selecting an option in this
field. Do not slow down the speed by lower than 40% to prevent CPU over-
heat.
CPUFAN Tolerance Value
This field is used to select the tolerance value of the CPU's temperature. The
options are 1, 2, 3, 4 and 5. If you selected 3, it allows the temperature to
run 3 degrees higher or lower. The CPU fan will smartly adjust it's speed in
accordance to the temperature.
CPUFAN Stop Value
Used to enter the stop value of the CPU fan.
CPUFAN StopTime Value
Used to enter the stop-time value of the CPU fan.
BIOS SETUP UTILITY
[Disabled]
:34
C/93
F
o
o
:51
C/123
F
o
o
:N/A
:1917 RPM
:5273 RPM
:1.216 V
:3.344 V
:5.056 V
:1.096 V
:1.488 V
:12.152 V
:3.344 V
[Enabled]
[055]
[03]
[150]
[010]
BIOS Setup
Chassis Intrusion
(Case Open) function
Select Screen
←
Select Item
↑↓
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
3
65
Advertisement
Table of Contents
