Pcipnp - DFI-ITOX EL332-IP User Manual

PCIPnP

The PCIPnP menu is used to configure PCI Plug and Play devices.
Important:
Setting incorrect field values may cause the system to malfunction.
Main Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug & Play O/S
PCI Latency Timer
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Plug & Play O/S
Yes
The operating system configures Plug and Play (PnP) devices that are not re-
quired to boot in a Plug and Play supported operating system.
No
The BIOS configures all the devices in the system.
PCI Latency Timer
This feature is used to select the length of time each PCI device will control the
bus before another takes over. The larger the value, the longer the PCI device
can retain control of the bus. Since each access to the bus comes with an initial
delay before any transaction can be made, low values for the PCI Latency Timer
will reduce the effectiveness of the PCI bandwidth while higher values will im-
prove it.
IRQ3 to IRQ15
Available
The specified IRQ is available for PCI/PnP devices.
Reserved
The specified IRQ is reserved for Legacy ISA devices.
BIOS SETUP UTILITY
PCIPnP Boot Security
[No]
[64]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
BIOS Setup
Chipset Exit
NO: lets the BIOS
configure all the devices
in the system.
YES: lets the operating
system configure Plug
and Play (PnP) devices
not required for boot
if your system has a
Plug and Play operating
system.
Select Screen
←
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3
77