Table of Contents
Advertisement
2
Hardware Installation
Universal Serial Bus Connectors
USB 2
USB 1
2
1
The system board supports 6 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Two onboard USB 2.0/1.1 ports (Black) are at location CN7 (USB
1-2) of the system board.
The JUSB1 (USB 3-4) and JUSB2 (USB 5-6) connectors allow you
to connect 4 additional USB 2.0/1.1 ports. The additional USB ports
may be mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then insert the connector that is
attached to the USB port cables to JUSB1 or JUSB2.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
40
1 0
9
USB 3-4
USB 5-6
Advertisement
Table of Contents
