Table of Contents
Advertisement
2
Hardware Installation
Jumper Setting
If the serial device connected to COM 2 and/or COM 4 requires
auxiliary power from the system board, set JP12 and/or JP13
appropriately. Refer to "COM 2 RS232/AUX Select" and "COM 4
RS232/RS485/AUX Select" in this chapter for more information.
BIOS Setting
Configure the serial ports in the Integrated Peripherals submenu
("Super IO Device" section) of the BIOS. Refer to chapter 3 for
more information.
36
Advertisement
Table of Contents
