Table of Contents
Advertisement
General Weights
Weights (lb)
Important: The weight information provided here should be
used for general information only. Trane does
not recommend using this weight information
for considerations relative to chiller handling,
Table 2. Representative weights, 60 Hz chillers (lb)
Comp Size
Model
NTON
2000–2600
CDHH
2800–3300
2800–3300
Notes:
1.
TECU tubes, 0.028 in. tube wall thickness.
2.
300 psig marine waterboxes.
3.
Heaviest possible bundle and motor combination.
4.
Operating weights assume the largest possible refrigerant charge.
5.
Industrial Control Panel (INDP) option, add 50 lb.
6.
Control Power Transformer (CPTR) option, add 280 lb.
7.
Supplemental Motor Protection (SMP) option, add 500 lb.
8.
To calculate the maximum chiller weight with starter/drive, add the starter/AFD weight from the following table (maximum weights, unit-mounted starters/AFDs [lb]) to
the chiller maximum weight from this table. Note that Duplex™ chiller models CDHH will have two starters, one for each compressor.
Table 3. Representative weights, 50Hz chillers (lb)
Comp Size
Model
NTON
1750–2250
CDHH
3050
3050
Notes:
1.
TECU tubes, 0.028 in. tube wall thickness.
2.
300 psig marine waterboxes.
3.
Heaviest possible bundle and motor combination.
4.
Operating weights assume the largest possible refrigerant charge.
5.
Industrial Control Panel (INDP) option, add 50 lb.
6.
Control Power Transformer (CPTR) option, add 280 lb.
7.
Supplemental Motor Protection (SMP) option, add 500 lb.
8.
To calculate the maximum chiller weight with starter/drive, add the starter/AFD weight from the following table (maximum weights, unit-mounted starters/AFDs [lb]) to
the chiller maximum weight from this table. Note that Duplex™ chiller models CDHH will have two starters, one for each compressor.
Table 4. Maximum weights, unit-mounted starters/Adaptive Frequency™ Drives (AFDs) (lb)
Low Voltage (less than 600 volts)
Adaptive Frequency Drive (less than 600 volts)
Medium Voltage (2300–6600 volts)
Note: All weights are nominal and ±10%.
CDHH-SVX003C-EN
Evap Size
CPKW
EVSZ
1340
400M
1340
440M
1340
440X
Evap Size
CPKW
EVSZ
1023
400M
1023
440M
1023
440X
Unit Clearances and Weights
rigging, or placement. The large number of
variances between chiller selections drives
variances in chiller weights that are not
recognized in these tables. For specific
weights for your chiller, refer to your submittal
package.
Weights without Starters
Cond Size
Operating
CDSZ
440M
124422
440M
134278
440X
141614
Cond Size
Operating
CDSZ
440M
127870
440M
137126
440X
144462
Wye-delta
900 amp
1210 amp
Across-the-line
Primary Reactor
Autotransformer
Shipping
100930
108299
113420
Weights without Starters
Shipping
104378
111147
116268
557
3000
3000
652
1602
1702
19
Advertisement
Table of Contents
