Security Settings; Handset Code; Pin Code - Zte -J G500 User Manual

completely charge the battery before using the phone for the first time.
A new battery's full performance is achieved only after three complete
charge and discharge cycles.
● Once the charging is complete, remove the charger from both the
power outlet and the phone.
● To charge the battery, you can use the provided charger or the USB
data cable.
● Charging is only possible within a temperature range of -5 ℃ to +45
℃.

Security Settings

Handset Code

Phone password can protect your phone efficiently and avoid illegal
usage. If phone password protection is activated, you should input the
correct password at phone start-up.
● For a new bought phone, the protection function is not activated and
the default password is 0000.
● In standby mode, select Menu > Settings > Security Settings > Use
Phone Code to activate or deactivate password protection.
● In standby mode, select Menu > Settings > Security Settings >
Change Phone Code to change phone password. It is suggested to
change the password according to your requirement.
Notes:
Please remember the password you set, otherwise your handset can not
be used normally, need to contact ZTE after-sales service center.

PIN Code

PIN code is the personal identification code of UIM card, used to avoid
illegal usage for your UIM card. Once PIN code is started, the correct PIN
code should be input at phone start-up, otherwise the phone can only
execute emergency call.
● For a new bought card, the default code is supplied by the service
21