Security Setting - Zte WP805 User Manual

function will be enabled in Phonebook or Call Log, i.e. IP number
will be automatically added before the number of the call you are
going to make.
DDD Setting (set by operator): Set the local area code (inc-
luding "0").
Note: IP Setting, DDD Setting, and Network Number should be
set by the network service provider via NMS. Please don't set it by yourself,
otherwise, the phone usage may be affected.

4.9.4 Security Setting

Configure security settings to avoid illegal use of your phone. Press
Menu Settings
Note: The Default phone password is 1234.
SMS password
Select SMS Choose On to avoid unauthorized viewing of your short
messages. Choose Off to disable it.
Note: The default password for short messages is 5678.
Handset Lock
Choose On to enable password protection, so you will be prompted to
enter the password on the next start-up. Choose Off to disable password
protection.
If the phone password is enabled, emergency calls can be made.
Handset Call Bar
Enter the submenu Handset Call Bar
- Bar Incoming:
Press Select, and then choose Bar All to ban all incoming
calls. Choose List to ban all numbers in the blacklist. Choose
All Except List to ban the calls not included in the list. Choose
Cancel All to cancel all restrictions.
- Bar Outgoing:
Press Select, and then choose Bar All to ban all outgoing
calls except emergency calls. Choose List to ban all numbers in
the ban-list. Choose Cancel All to cancel all restrictions.
Security Setting.
41
Function Menu
4