Table of Contents
Advertisement
Getting Started
Installing Battery and (U)SIM Card
The charger and other accessories should be disconnected from your
phone before you insert or remove the battery or UIM card.
Notes:
● The phone automatically switches off if the battery voltage is too low.
● When not using the battery for a long period, remove it from the
phone and store it in a cool dry place.
1. Press and hold End Key to turn off the phone.
2. Remove the back cover.
1
Notes:
When the battery is inside, put finger on the finger grip, and then lift up
the battery to remove the battery.
3. Insert the UIM card into the card holder, with the metal contacts facing
downward and the cut corner in the right direction. Make sure it is
pushed all the way to the end as shown below.
2
15
3
Advertisement
Table of Contents
