Ptt Settings - Zte -J G500 User Manual

PTT Settings

1. In standby mode, select Left soft key [Menu] > PTT Settings;
2. Select your desired item to make setting:
● PTT Function: select On or Off to activate or deactivate PTT
function.
● Watching Function: select On or Off to activate or deactivate PTT
watching function.
● Emergency Call: set the emergency call type and the number. The
type can set as Normal Call, Private Call, Group Call and DAS.
● SupplementSvc: set the PTT supplement service.
Call Attribute: set PTT call attribute as Normal or Pre-emptive.
●
DynaManagement: manage the PTT group.
●
Add Member: add member to PTT group.
●
Delete Member: delete member from PTT group.
●
Set Priority: set group member PTT call priority.
●
Set Talk Time: set group member maximum talk time.
●
Supplement Svc Set: set the supplement functions.
●
Private Call Forward: activate, deactivate or query PTT private
●
call forward function, and set call forward number.
Duty Number: set duty number and status. when the status set as
●
onduty, you can receive the duty number PTT call, when the
status set as offduty, you would not receive the duty number PTT
call.
PTT CNIR: set PTT number identification restriction function. After
●
activate this function, PTT number will not be identified during the
PTT call.
Call Alert Busy: activate, deactivate or query call alert busy
●
function. After activate this function, You could receive the other
incoming call prompt when you are making the call.
● Key Set: set the key function.
End Key During PTT Call: set the function of End Key during the
●
46