Changing The Decorative Frame; Copying Files From A Computer Or Flash Drive; Connect To A Windows Computer - Pandigital PAN80-2 User Manual

b. Pressing ENTER on a thumbnail will display the picture in single
picture mode.
c. Pressing SLIDESHOW will slideshow all the pictures in that folder.
d. Pressing EXIT will in either single picture mode or slideshow mode will
return you to the thumbnail screen.
e. Functions like zoom, rotate, and copy are all available and behave in
the same manner as described in the user guide.

Changing the Decorative Frame

Depending on the model, your Digital Photo Frame may come with
interchangeable decorative frames.
1. To change the frame, remove two screws on the back of the frame and lift
the unit from the frame.
2. Place the unit into the new frame, replace the screws, and finger-tighten.

Copying Files from a Computer or Flash Drive

You can connect the Digital Photo Frame to a Windows or Macintosh
computer to copy files to the built-in memory. You can also connect a USB
flash drive to the frame to copy files.

Connect to a Windows Computer

To copy files from between your computer and the Digital Photo Frame do the
following:
1. Plug in and turn on the Digital Photo Frame.
2. Connect the small end of the USB cable to the Mini USB port on the
Digital Photo Frame.
3. Connect the Larger end of the USB cable to a USB port on your computer.
4. Open My Computer on your Desktop. A window showing all drives
connected to your computer opens. (It will look similar to the screen
shown below.)
24