Setting Viewing Options; Displaying A Clock With A Calendar And A Slideshow - Pandigital PAN80-2 User Manual

a. Search and Select the "Available Device" to connect from the list.
You should see "Pandigital" appears in the list. Authentication Code
is "1234" default value. Select "Pandigital" and continue transmitting
photo to DPF.
Note: the actual procedure of sending photo to your DPF may vary.
Please refer to your mobile device user guide manual for details.
b. When you transmitting selected photo to Pandigital DPF, you shell
see "Photo Transmitting" dialog appear in the middle of your DPF
screen.
When copy photo completes, your DPF will play the copied photo
immediately after.

Setting Viewing Options

You can control all of the viewing options in the Setup Menu using the
remote control. You can display the on-screen Setup Menu at any time by
pressing the Setup button. Only available setup options will be displayed for
each screen.
1. With the Home screen opens, press Setup to open the Setup Menu.
2. With the Setup Menu open, use the Up and Down arrows to choose a
display option.
3. Press ENTER to select the option. A second menu opens, listing the
available settings. A blue highlight shows the current setting.
4. Use the Up and Down arrows to choose the desired setting.
5. Press ENTER to select the setting. The second menu closes.
6. You can make as many changes as you wish in the same manner. When
you are finished, press the EXIT button to close the Setup Menu and
return to the previous screen.

Displaying a Clock with a Calendar and a Slideshow

You can use your Digital Photo Frame as a desk calendar with a real-time
clock and continuous slideshow. You can also use the Digital Photo Frame as
an Alarm Clock, after setting internal clock.
To Display the Calendar/Clock screen:
1. Open the Home Screen.
20